|submitted by babyforex to u/babyforex [link] [comments]|
|submitted by IntraQuotes to u/IntraQuotes [link] [comments]|
|submitted by ForexMTindicators to u/ForexMTindicators [link] [comments]|
Firstly, thanks for the overwhelming comments and feedback. Genuinely really appreciated. I am pleased 500+ of you find it useful.submitted by getmrmarket to Forex [link] [comments]
If you didn't read the first post you can do so here: risk management part I. You'll need to do so in order to make sense of the topic.
As ever please comment/reply below with questions or feedback and I'll do my best to get back to you.
Letting stops breatheWe talked earlier about giving a position enough room to breathe so it is not stopped out in day-to-day noise.
Let’s consider the chart below and imagine you had a trailing stop. It would be super painful to miss out on the wider move just because you left a stop that was too tight.
Imagine being long and stopped out on a meaningless retracement ... ouch!
One simple technique is simply to look at your chosen chart - let’s say daily bars. And then look at previous trends and use the measuring tool. Those generally look something like this and then you just click and drag to measure.
For example if we wanted to bet on a downtrend on the chart above we might look at the biggest retracement on the previous uptrend. That max drawdown was about 100 pips or just under 1%. So you’d want your stop to be able to withstand at least that.
If market conditions have changed - for example if CVIX has risen - and daily ranges are now higher you should incorporate that. If you know a big event is coming up you might think about that, too. The human brain is a remarkable tool and the power of the eye-ball method is not to be dismissed. This is how most discretionary traders do it.
There are also more analytical approaches.
Some look at the Average True Range (ATR). This attempts to capture the volatility of a pair, typically averaged over a number of sessions. It looks at three separate measures and takes the largest reading. Think of this as a moving average of how much a pair moves.
For example, below shows the daily move in EURUSD was around 60 pips before spiking to 140 pips in March. Conditions were clearly far more volatile in March. Accordingly, you would need to leave your stop further away in March and take a correspondingly smaller position size.
ATR is available on pretty much all charting systems
Professional traders tend to use standard deviation as a measure of volatility instead of ATR. There are advantages and disadvantages to both. Averages are useful but can be misleading when regimes switch (see above chart).
Once you have chosen a measure of volatility, stop distance can then be back-tested and optimised. For example does 2x ATR work best or 5x ATR for a given style and time horizon?
Discretionary traders may still eye-ball the ATR or standard deviation to get a feeling for how it has changed over time and what ‘normal’ feels like for a chosen study period - daily, weekly, monthly etc.
Reasons to change a stopAs a general rule you should be disciplined and not change your stops. Remember - losers average losers. This is really hard at first and we’re going to look at that in more detail later.
There are some good reasons to modify stops but they are rare.
One reason is if another risk management process demands you stop trading and close positions. We’ll look at this later. In that case just close out your positions at market and take the loss/gains as they are.
Another is event risk. If you have some big upcoming data like Non Farm Payrolls that you know can move the market +/- 150 pips and you have no edge going into the release then many traders will take off or scale down their positions. They’ll go back into the positions when the data is out and the market has quietened down after fifteen minutes or so. This is a matter of some debate - many traders consider it a coin toss and argue you win some and lose some and it all averages out.
Trailing stops can also be used to ‘lock in’ profits. We looked at those before. As the trade moves in your favour (say up if you are long) the stop loss ratchets with it. This means you may well end up ‘stopping out’ at a profit - as per the below example.
The mighty trailing stop loss order
It is perfectly reasonable to have your stop loss move in the direction of PNL. This is not exposing you to more risk than you originally were comfortable with. It is taking less and less risk as the trade moves in your favour. Trend-followers in particular love trailing stops.
One final question traders ask is what they should do if they get stopped out but still like the trade. Should they try the same trade again a day later for the same reasons? Nope. Look for a different trade rather than getting emotionally wed to the original idea.
Let’s say a particular stock looked cheap based on valuation metrics yesterday, you bought, it went down and you got stopped out. Well, it is going to look even better on those same metrics today. Maybe the market just doesn’t respect value at the moment and is driven by momentum. Wait it out.
Otherwise, why even have a stop in the first place?
Entering and exiting winning positionsTake profits are the opposite of stop losses. They are also resting orders, left with the broker, to automatically close your position if it reaches a certain price.
Imagine I’m long EURUSD at 1.1250. If it hits a previous high of 1.1400 (150 pips higher) I will leave a sell order to take profit and close the position.
The rookie mistake on take profits is to take profit too early. One should start from the assumption that you will win on no more than half of your trades. Therefore you will need to ensure that you win more on the ones that work than you lose on those that don’t.
Sad to say but incredibly common: retail traders often take profits way too early
This is going to be the exact opposite of what your emotions want you to do. We are going to look at that in the Psychology of Trading chapter.
Remember: let winners run. Just like stops you need to know in advance the level where you will close out at a profit. Then let the trade happen. Don’t override yourself and let emotions force you to take a small profit. A classic mistake to avoid.
The trader puts on a trade and it almost stops out before rebounding. As soon as it is slightly in the money they spook and cut out, instead of letting it run to their original take profit. Do not do this.
Entering positions with limit ordersThat covers exiting a position but how about getting into one?
Take profits can also be left speculatively to enter a position. Sometimes referred to as “bids” (buy orders) or “offers” (sell orders). Imagine the price is 1.1250 and the recent low is 1.1205.
You might wish to leave a bid around 1.2010 to enter a long position, if the market reaches that price. This way you don’t need to sit at the computer and wait.
Again, typically traders will use tech analysis to identify attractive levels. Again - other traders will cluster with your orders. Just like the stop loss we need to bake that in.
So this time if we know everyone is going to buy around the recent low of 1.1205 we might leave the take profit bit a little bit above there at 1.1210 to ensure it gets done. Sure it costs 5 more pips but how mad would you be if the low was 1.1207 and then it rallied a hundred points and you didn’t have the trade on?!
There are two more methods that traders often use for entering a position.
Scaling in is one such technique. Let’s imagine that you think we are in a long-term bulltrend for AUDUSD but experiencing a brief retracement. You want to take a total position of 500,000 AUD and don’t have a strong view on the current price action.
You might therefore leave a series of five bids of 100,000. As the price moves lower each one gets hit. The nice thing about scaling in is it reduces pressure on you to pick the perfect level. Of course the risk is that not all your orders get hit before the price moves higher and you have to trade at-market.
Pyramiding is the second technique. Pyramiding is for take profits what a trailing stop loss is to regular stops. It is especially common for momentum traders.
Pyramiding into a position means buying more as it goes in your favour
Again let’s imagine we’re bullish AUDUSD and want to take a position of 500,000 AUD.
Here we add 100,000 when our first signal is reached. Then we add subsequent clips of 100,000 when the trade moves in our favour. We are waiting for confirmation that the move is correct.
Obviously this is quite nice as we humans love trading when it goes in our direction. However, the drawback is obvious: we haven’t had the full amount of risk on from the start of the trend.
You can see the attractions and drawbacks of both approaches. It is best to experiment and choose techniques that work for your own personal psychology as these will be the easiest for you to stick with and build a disciplined process around.
Risk:reward and win ratiosBe extremely skeptical of people who claim to win on 80% of trades. Most traders will win on roughly 50% of trades and lose on 50% of trades. This is why risk management is so important!
Once you start keeping a trading journal you’ll be able to see how the win/loss ratio looks for you. Until then, assume you’re typical and that every other trade will lose money.
If that is the case then you need to be sure you make more on the wins than you lose on the losses. You can see the effect of this below.
A combination of win % and risk:reward ratio determine if you are profitable
A typical rule of thumb is that a ratio of 1:3 works well for most traders.
That is, if you are prepared to risk 100 pips on your stop you should be setting a take profit at a level that would return you 300 pips.
One needn’t be religious about these numbers - 11 pips and 28 pips would be perfectly fine - but they are a guideline.
Again - you should still use technical analysis to find meaningful chart levels for both the stop and take profit. Don’t just blindly take your stop distance and do 3x the pips on the other side as your take profit. Use the ratio to set approximate targets and then look for a relevant resistance or support level in that kind of region.
Risk-adjusted returnsNot all returns are equal. Suppose you are examining the track record of two traders. Now, both have produced a return of 14% over the year. Not bad!
The first trader, however, made hundreds of small bets throughout the year and his cumulative PNL looked like the left image below.
The second trader made just one bet — he sold CADJPY at the start of the year — and his PNL looked like the right image below with lots of large drawdowns and volatility.
Would you rather have the first trading record or the second?
If you were investing money and betting on who would do well next year which would you choose? Of course all sensible people would choose the first trader. Yet if you look only at returns one cannot distinguish between the two. Both are up 14% at that point in time. This is where the Sharpe ratio helps .
A high Sharpe ratio indicates that a portfolio has better risk-adjusted performance. One cannot sensibly compare returns without considering the risk taken to earn that return.
If I can earn 80% of the return of another investor at only 50% of the risk then a rational investor should simply leverage me at 2x and enjoy 160% of the return at the same level of risk.
This is very important in the context of Execution Advisor algorithms (EAs) that are popular in the retail community. You must evaluate historic performance by its risk-adjusted return — not just the nominal return. Incidentally look at the Sharpe ratio of ones that have been live for a year or more ...
Otherwise an EA developer could produce two EAs: the first simply buys at 1000:1 leverage on January 1st ; and the second sells in the same manner. At the end of the year, one of them will be discarded and the other will look incredible. Its risk-adjusted return, however, would be abysmal and the odds of repeated success are similarly poor.
Sharpe ratioThe Sharpe ratio works like this:
You don’t really need to know how to calculate Sharpe ratios. Good trading software will do this for you. It will either be available in the system by default or you can add a plug-in.
VARVAR is another useful measure to help with drawdowns. It stands for Value at Risk. Normally people will use 99% VAR (conservative) or 95% VAR (aggressive). Let’s say you’re long EURUSD and using 95% VAR. The system will look at the historic movement of EURUSD. It might spit out a number of -1.2%.
A 5% VAR of -1.2% tells you you should expect to lose 1.2% on 5% of days, whilst 95% of days should be better than that
This means it is expected that on 5 days out of 100 (hence the 95%) the portfolio will lose 1.2% or more. This can help you manage your capital by taking appropriately sized positions. Typically you would look at VAR across your portfolio of trades rather than trade by trade.
Sharpe ratios and VAR don’t give you the whole picture, though. Legendary fund manager, Howard Marks of Oaktree, notes that, while tools like VAR and Sharpe ratios are helpful and absolutely necessary, the best investors will also overlay their own judgment.
Investors can calculate risk metrics like VaR and Sharpe ratios (we use them at Oaktree; they’re the best tools we have), but they shouldn’t put too much faith in them. The bottom line for me is that risk management should be the responsibility of every participant in the investment process, applying experience, judgment and knowledge of the underlying investments.Howard Marks of Oaktree Capital
What he’s saying is don’t misplace your common sense. Do use these tools as they are helpful. However, you cannot fully rely on them. Both assume a normal distribution of returns. Whereas in real life you get “black swans” - events that should supposedly happen only once every thousand years but which actually seem to happen fairly often.
These outlier events are often referred to as “tail risk”. Don’t make the mistake of saying “well, the model said…” - overlay what the model is telling you with your own common sense and good judgment.
Coming up in part IIIAvailable here
Squeezes and other risks
Crap trades, timeouts and monthly limits
Disclaimer:This content is not investment advice and you should not place any reliance on it. The views expressed are the author's own and should not be attributed to any other person, including their employer.
How exactly did the British manage to diddle us and drain our wealth’ ? was the question that Basudev Chatterjee (later editor of a volume in the Towards Freedom project) had posed to me 50 years ago when we were fellow-students abroad.This is begging the question.
After decades of research I find that using India’s commodity export surplus as the measure and applying an interest rate of 5%, the total drain from 1765 to 1938, compounded up to 2016, comes to £9.2 trillion; since $4.86 exchanged for £1 those days, this sum equals about $45 trillion.This is completely meaningless. To understand why it's meaningless consider India's annual coconut exports. These are almost certainly a surplus but the surplus in trade is countered by the other country buying the product (indeed, by definition, trade surpluses contribute to the GDP of a nation which hardly plays into intuitive conceptualisations of drain).
She [Patnaik] consistently adopts statistical assumptions (such as compound interest at a rate of 5% per annum over centuries) that exaggerate the magnitude of the drainMoving on:
The exact mechanism of drain, or transfers from India to Britain was quite simple.Convenient.
Drain theory possessed the political merit of being easily grasped by a nation of peasants. [...] No other idea could arouse people than the thought that they were being taxed so that others in far off lands might live in comfort. [...] It was, therefore, inevitable that the drain theory became the main staple of nationalist political agitation during the Gandhian era.- Chandra et al. (1989)
The key factor was Britain’s control over our taxation revenues combined with control over India’s financial gold and forex earnings from its booming commodity export surplus with the world. Simply put, Britain used locally raised rupee tax revenues to pay for its net import of goods, a highly abnormal use of budgetary funds not seen in any sovereign country.The issue with figures like these is they all make certain methodological assumptions that are impossible to prove. From Roy in Frankema et al. (2019):
the "drain theory" of Indian poverty cannot be tested with evidence, for several reasons. First, it rests on the counterfactual that any money saved on account of factor payments abroad would translate into domestic investment, which can never be proved. Second, it rests on "the primitive notion that all payments to foreigners are "drain"", that is, on the assumption that these payments did not contribute to domestic national income to the equivalent extent (Kumar 1985, 384; see also Chaudhuri 1968). Again, this cannot be tested. [...] Fourth, while British officers serving India did receive salaries that were many times that of the average income in India, a paper using cross-country data shows that colonies with better paid officers were governed better (Jones 2013).Indeed, drain theory rests on some very weak foundations. This, in of itself, should be enough to dismiss any of the other figures that get thrown out. Nonetheless, I felt it would be a useful exercise to continue exploring Patnaik's take on drain theory.
The East India Company from 1765 onwards allocated every year up to one-third of Indian budgetary revenues net of collection costs, to buy a large volume of goods for direct import into Britain, far in excess of that country’s own needs.So what's going on here? Well Roy (2019) explains it better:
Colonial India ran an export surplus, which, together with foreign investment, was used to pay for services purchased from Britain. These payments included interest on public debt, salaries, and pensions paid to government offcers who had come from Britain, salaries of managers and engineers, guaranteed profts paid to railway companies, and repatriated business profts. How do we know that any of these payments involved paying too much? The answer is we do not.So what was really happening is the government was paying its workers for services (as well as guaranteeing profits - to promote investment - something the GoI does today Dalal (2019), and promoting business in India), and those workers were remitting some of that money to Britain. This is hardly a drain (unless, of course, Indian diaspora around the world today are "draining" it). In some cases, the remittances would take the form of goods (as described) see Chaudhuri (1983):
It is obvious that these debit items were financed through the export surplus on merchandise account, and later, when railway construction started on a large scale in India, through capital import. Until 1833 the East India Company followed a cumbersome method in remitting the annual home charges. This was to purchase export commodities in India out of revenue, which were then shipped to London and the proceeds from their sale handed over to the home treasury.While Roy's earlier point argues better paid officers governed better, it is honestly impossible to say what part of the repatriated export surplus was a drain, and what was not. However calling all of it a drain is definitely misguided.
she [Patnaik] consistently ignores research that would tend to cut the economic impact of the drain down to size, such as the work on the sources of investment during the industrial revolution (which shows that industrialisation was financed by the ploughed-back profits of industrialists) or the costs of empire school (which stresses the high price of imperial defence)
Since tropical goods were highly prized in other cold temperate countries which could never produce them, in effect these free goods represented international purchasing power for Britain which kept a part for its own use and re-exported the balance to other countries in Europe and North America against import of food grains, iron and other goods in which it was deficient.Re-exports necessarily adds value to goods when the goods are processed and when the goods are transported. The country with the largest navy at the time would presumably be in very good stead to do the latter.
The British historians Phyllis Deane and WA Cole presented an incorrect estimate of Britain’s 18th-19th century trade volume, by leaving out re-exports completely. I found that by 1800 Britain’s total trade was 62% higher than their estimate, on applying the correct definition of trade including re-exports, that is used by the United Nations and by all other international organisations.While interesting, and certainly expected for such an old book, re-exporting necessarily adds value to goods.
When the Crown took over from the Company, from 1861 a clever system was developed under which all of India’s financial gold and forex earnings from its fast-rising commodity export surplus with the world, was intercepted and appropriated by Britain. As before up to a third of India’s rising budgetary revenues was not spent domestically but was set aside as ‘expenditure abroad’.So, what does this mean? Britain appropriated all of India's earnings, and then spent a third of it aboard? Not exactly. She is describing home charges see Roy (2019) again:
Some of the expenditures on defense and administration were made in sterling and went out of the country. This payment by the government was known as the Home Charges. For example, interest payment on loans raised to finance construction of railways and irrigation works, pensions paid to retired officers, and purchase of stores, were payments in sterling. [...] almost all money that the government paid abroad corresponded to the purchase of a service from abroad. [...] The balance of payments system that emerged after 1800 was based on standard business principles. India bought something and paid for it. State revenues were used to pay for wages of people hired abroad, pay for interest on loans raised abroad, and repatriation of profits on foreign investments coming into India. These were legitimate market transactions.Indeed, if paying for what you buy is drain, then several billions of us are drained every day.
The Secretary of State for India in Council, based in London, invited foreign importers to deposit with him the payment (in gold, sterling and their own currencies) for their net imports from India, and these gold and forex payments disappeared into the yawning maw of the SoS’s account in the Bank of England.It should be noted that India having two heads was beneficial, and encouraged investment per Roy (2019):
The fact that the India Office in London managed a part of the monetary system made India creditworthy, stabilized its currency, and encouraged foreign savers to put money into railways and private enterprise in India. Current research on the history of public debt shows that stable and large colonies found it easier to borrow abroad than independent economies because the investors trusted the guarantee of the colonist powers.
Against India’s net foreign earnings he issued bills, termed Council bills (CBs), to an equivalent rupee value. The rate (between gold-linked sterling and silver rupee) at which the bills were issued, was carefully adjusted to the last farthing, so that foreigners would never find it more profitable to ship financial gold as payment directly to Indians, compared to using the CB route. Foreign importers then sent the CBs by post or by telegraph to the export houses in India, that via the exchange banks were paid out of the budgeted provision of sums under ‘expenditure abroad’, and the exporters in turn paid the producers (peasants and artisans) from whom they sourced the goods.Sunderland (2013) argues CBs had two main roles (and neither were part of a grand plot to keep gold out of India):
Council bills had two roles. They firstly promoted trade by handing the IO some control of the rate of exchange and allowing the exchange banks to remit funds to India and to hedge currency transaction risks. They also enabled the Indian government to transfer cash to England for the payment of its UK commitments.
The United Nations (1962) historical data for 1900 to 1960, show that for three decades up to 1928 (and very likely earlier too) India posted the second highest merchandise export surplus in the world, with USA in the first position. Not only were Indians deprived of every bit of the enormous international purchasing power they had earned over 175 years, even its rupee equivalent was not issued to them since not even the colonial government was credited with any part of India’s net gold and forex earnings against which it could issue rupees. The sleight-of-hand employed, namely ‘paying’ producers out of their own taxes, made India’s export surplus unrequited and constituted a tax-financed drain to the metropolis, as had been correctly pointed out by those highly insightful classical writers, Dadabhai Naoroji and RCDutt.It doesn't appear that others appreciate their insight Roy (2019):
K. N. Chaudhuri rightly calls such practice ‘confused’ economics ‘coloured by political feelings’.
Surplus budgets to effect such heavy tax-financed transfers had a severe employment–reducing and income-deflating effect: mass consumption was squeezed in order to release export goods. Per capita annual foodgrains absorption in British India declined from 210 kg. during the period 1904-09, to 157 kg. during 1937-41, and to only 137 kg by 1946.Dewey (1978) points out reliability issues with Indian agriculutural statistics, however this calorie decline persists to this day. Some of it is attributed to less food being consumed at home Smith (2015), a lower infectious disease burden Duh & Spears (2016) and diversified diets Vankatesh et al. (2016).
If even a part of its enormous foreign earnings had been credited to it and not entirely siphoned off, India could have imported modern technology to build up an industrial structure as Japan was doing.This is, unfortunately, impossible to prove. Had the British not arrived in India, there is no clear indication that India would've united (this is arguably more plausible than the given counterfactual1). Had the British not arrived in India, there is no clear indication India would not have been nuked in WW2, much like Japan. Had the British not arrived in India, there is no clear indication India would not have been invaded by lizard people,
This article starts from the premise that while economic categories - the extent of commodity production, wage labour, monetarisation of the economy, etc - should be the basis for any analysis of the production relations of pre-British India, it is the nature of class struggles arising out of particular class alignments that finally gives the decisive twist to social change. Arguing on this premise, and analysing the available evidence, this article concludes that there was little potential for industrial revolution before the British arrived in India because, whatever might have been the character of economic categories of that period, the class relations had not sufficiently matured to develop productive forces and the required class struggle for a 'revolution' to take place.A view echoed in Raychaudhuri (1983):
Yet all of this did not amount to an economic situation comparable to that of western Europe on the eve of the industrial revolution. Her technology - in agriculture as well as manufacturers - had by and large been stagnant for centuries. [...] The weakness of the Indian economy in the mid-eighteenth century, as compared to pre-industrial Europe was not simply a matter of technology and commercial and industrial organization. No scientific or geographical revolution formed part of the eighteenth-century Indian's historical experience. [...] Spontaneous movement towards industrialisation is unlikely in such a situation.So now we've established India did not have industrial potential, was India similar to Japan just before the Meiji era? The answer, yet again, unsurprisingly, is no. Japan's economic situation was not comparable to India's, which allowed for Japan to finance its revolution. From Yasuba (1986):
All in all, the Japanese standard of living may not have been much below the English standard of living before industrialization, and both of them may have been considerably higher than the Indian standard of living. We can no longer say that Japan started from a pathetically low economic level and achieved a rapid or even "miraculous" economic growth. Japan's per capita income was almost as high as in Western Europe before industrialization, and it was possible for Japan to produce surplus in the Meiji Period to finance private and public capital formation.The circumstances that led to Meiji Japan were extremely unique. See Tomlinson (1985):
Most modern comparisons between India and Japan, written by either Indianists or Japanese specialists, stress instead that industrial growth in Meiji Japan was the product of unique features that were not reproducible elsewhere. [...] it is undoubtably true that Japan's progress to industrialization has been unique and unrepeatableSo there you have it. Unsubstantiated statistical assumptions, calling any number you can a drain & assuming a counterfactual for no good reason gets you this $45 trillion number. Hopefully that's enough to bury it in the ground.
Perhaps the single greatest and most enduring impact of British rule over India is that it created an Indian nation, in the modern political sense. After centuries of rule by different dynasties overparts of the Indian sub-continent, and after about 100 years of British rule, Indians ceased to be merely Bengalis, Maharashtrians,or Tamils, linguistically and culturally.or see Bryant 2000:
But then, it would be anachronistic to condemn eighteenth-century Indians, who served the British, as collaborators, when the notion of 'democratic' nationalism or of an Indian 'nation' did not then exist. [...] Indians who fought for them, differed from the Europeans in having a primary attachment to a non-belligerent religion, family and local chief, which was stronger than any identity they might have with a more remote prince or 'nation'.
﷽submitted by aibnsamin1 to Bitcoin [link] [comments]
The Federal Reserve and the United States government are pumping extreme amounts of money into the economy, already totaling over $484 billion. They are doing so because it already had a goal to inflate the United States Dollar (USD) so that the market can continue to all-time highs. It has always had this goal. They do not care how much inflation goes up by now as we are going into a depression with the potential to totally crash the US economy forever. They believe the only way to save the market from going to zero or negative values is to inflate it so much that it cannot possibly crash that low. Even if the market does not dip that low, inflation serves the interest of powerful people.
The impending crash of the stock market has ramifications for Bitcoin, as, though there is no direct ongoing-correlation between the two, major movements in traditional markets will necessarily affect Bitcoin. According to the Blockchain Center’s Cryptocurrency Correlation Tool, Bitcoin is not correlated with the stock market. However, when major market movements occur, they send ripples throughout the financial ecosystem which necessary affect even ordinarily uncorrelated assets.
Therefore, Bitcoin will reach X price on X date after crashing to a price of X by X date.
Stock Market CrashThe Federal Reserve has caused some serious consternation with their release of ridiculous amounts of money in an attempt to buoy the economy. At face value, it does not seem to have any rationale or logic behind it other than keeping the economy afloat long enough for individuals to profit financially and politically. However, there is an underlying basis to what is going on which is important to understand in order to profit financially.
All markets are functionally price probing systems. They constantly undergo a price-discovery process. In a fiat system, money is an illusory and a fundamentally synthetic instrument with no intrinsic value – similar to Bitcoin. The primary difference between Bitcoin is the underlying technology which provides a slew of benefits that fiat does not. Fiat, however, has an advantage in being able to have the support of powerful nation-states which can use their might to insure the currency’s prosperity.
Traditional stock markets are composed of indices (pl. of index). Indices are non-trading market instruments which are essentially summaries of business values which comprise them. They are continuously recalculated throughout a trading day, and sometimes reflected through tradable instruments such as Exchange Traded Funds or Futures. Indices are weighted by market capitalizations of various businesses.
Price theory essentially states that when a market fails to take out a new low in a given range, it will have an objective to take out the high. When a market fails to take out a new high, it has an objective to make a new low. This is why price-time charts go up and down, as it does this on a second-by-second, minute-by-minute, day-by-day, and even century-by-century basis. Therefore, market indices will always return to some type of bull market as, once a true low is formed, the market will have a price objective to take out a new high outside of its’ given range – which is an all-time high. Instruments can only functionally fall to zero, whereas they can grow infinitely.
So, why inflate the economy so much?
Deflation is disastrous for central banks and markets as it raises the possibility of producing an overall price objective of zero or negative values. Therefore, under a fractional reserve system with a fiat currency managed by a central bank – the goal of the central bank is to depreciate the currency. The dollar is manipulated constantly with the intention of depreciating its’ value.
Central banks have a goal of continued inflated fiat values. They tend to ordinarily contain it at less than ten percent (10%) per annum in order for the psyche of the general populace to slowly adjust price increases. As such, the markets are divorced from any other logic. Economic policy is the maintenance of human egos, not catering to fundamental analysis. Gross Domestic Product (GDP) growth is well-known not to be a measure of actual growth or output. It is a measure of increase in dollars processed. Banks seek to produce raising numbers which make society feel like it is growing economically, making people optimistic. To do so, the currency is inflated, though inflation itself does not actually increase growth. When society is optimistic, it spends and engages in business – resulting in actual growth. It also encourages people to take on credit and debts, creating more fictional fiat.
Inflation is necessary for markets to continue to reach new heights, generating positive emotional responses from the populace, encouraging spending, encouraging debt intake, further inflating the currency, and increasing the sale of government bonds. The fiat system only survives by generating more imaginary money on a regular basis.
Bitcoin investors may profit from this by realizing that stock investors as a whole always stand to profit from the market so long as it is managed by a central bank and does not collapse entirely. If those elements are filled, it has an unending price objective to raise to new heights. It also allows us to realize that this response indicates that the higher-ups believe that the economy could crash in entirety, and it may be wise for investors to have multiple well-thought-out exit strategies.
Economic Analysis of BitcoinThe reason why the Fed is so aggressively inflating the economy is due to fears that it will collapse forever or never rebound. As such, coupled with a global depression, a huge demand will appear for a reserve currency which is fundamentally different than the previous system. Bitcoin, though a currency or asset, is also a market. It also undergoes a constant price-probing process. Unlike traditional markets, Bitcoin has the exact opposite goal. Bitcoin seeks to appreciate in value and not depreciate. This has a quite different affect in that Bitcoin could potentially become worthless and have a price objective of zero.
Bitcoin was created in 2008 by a now famous mysterious figure known as Satoshi Nakamoto and its’ open source code was released in 2009. It was the first decentralized cryptocurrency to utilize a novel protocol known as the blockchain. Up to one megabyte of data may be sent with each transaction. It is decentralized, anonymous, transparent, easy to set-up, and provides myriad other benefits. Bitcoin is not backed up by anything other than its’ own technology.
Bitcoin is can never be expected to collapse as a framework, even were it to become worthless. The stock market has the potential to collapse in entirety, whereas, as long as the internet exists, Bitcoin will be a functional system with a self-authenticating framework. That capacity to persist regardless of the actual price of Bitcoin and the deflationary nature of Bitcoin means that it has something which fiat does not – inherent value.
Bitcoin is based on a distributed database known as the “blockchain.” Blockchains are essentially decentralized virtual ledger books, replete with pages known as “blocks.” Each page in a ledger is composed of paragraph entries, which are the actual transactions in the block.
Blockchains store information in the form of numerical transactions, which are just numbers. We can consider these numbers digital assets, such as Bitcoin. The data in a blockchain is immutable and recorded only by consensus-based algorithms. Bitcoin is cryptographic and all transactions are direct, without intermediary, peer-to-peer.
Bitcoin does not require trust in a central bank. It requires trust on the technology behind it, which is open-source and may be evaluated by anyone at any time. Furthermore, it is impossible to manipulate as doing so would require all of the nodes in the network to be hacked at once – unlike the stock market which is manipulated by the government and “Market Makers”. Bitcoin is also private in that, though the ledge is openly distributed, it is encrypted. Bitcoin’s blockchain has one of the greatest redundancy and information disaster recovery systems ever developed.
Bitcoin has a distributed governance model in that it is controlled by its’ users. There is no need to trust a payment processor or bank, or even to pay fees to such entities. There are also no third-party fees for transaction processing. As the ledge is immutable and transparent it is never possible to change it – the data on the blockchain is permanent. The system is not easily susceptible to attacks as it is widely distributed. Furthermore, as users of Bitcoin have their private keys assigned to their transactions, they are virtually impossible to fake. No lengthy verification, reconciliation, nor clearing process exists with Bitcoin.
Bitcoin is based on a proof-of-work algorithm. Every transaction on the network has an associated mathetical “puzzle”. Computers known as miners compete to solve the complex cryptographic hash algorithm that comprises that puzzle. The solution is proof that the miner engaged in sufficient work. The puzzle is known as a nonce, a number used only once. There is only one major nonce at a time and it issues 12.5 Bitcoin. Once it is solved, the fact that the nonce has been solved is made public.
A block is mined on average of once every ten minutes. However, the blockchain checks every 2,016,000 minutes (approximately four years) if 201,600 blocks were mined. If it was faster, it increases difficulty by half, thereby deflating Bitcoin. If it was slower, it decreases, thereby inflating Bitcoin. It will continue to do this until zero Bitcoin are issued, projected at the year 2140. On the twelfth of May, 2020, the blockchain will halve the amount of Bitcoin issued when each nonce is guessed. When Bitcoin was first created, fifty were issued per block as a reward to miners. 6.25 BTC will be issued from that point on once each nonce is solved.
Unlike fiat, Bitcoin is a deflationary currency. As BTC becomes scarcer, demand for it will increase, also raising the price. In this, BTC is similar to gold. It is predictable in its’ output, unlike the USD, as it is based on a programmed supply. We can predict BTC’s deflation and inflation almost exactly, if not exactly. Only 21 million BTC will ever be produced, unless the entire network concedes to change the protocol – which is highly unlikely.
Some of the drawbacks to BTC include congestion. At peak congestion, it may take an entire day to process a Bitcoin transaction as only three to five transactions may be processed per second. Receiving priority on a payment may cost up to the equivalent of twenty dollars ($20). Bitcoin mining consumes enough energy in one day to power a single-family home for an entire week.
Trading or Investing?The fundamental divide in trading revolves around the question of market structure. Many feel that the market operates totally randomly and its’ behavior cannot be predicted. For the purposes of this article, we will assume that the market has a structure, but that that structure is not perfect. That market structure naturally generates chart patterns as the market records prices in time. In order to determine when the stock market will crash, causing a major decline in BTC price, we will analyze an instrument, an exchange traded fund, which represents an index, as opposed to a particular stock. The price patterns of the various stocks in an index are effectively smoothed out. In doing so, a more technical picture arises. Perhaps the most popular of these is the SPDR S&P Standard and Poor 500 Exchange Traded Fund ($SPY).
In trading, little to no concern is given about value of underlying asset. We are concerned primarily about liquidity and trading ranges, which are the amount of value fluctuating on a short-term basis, as measured by volatility-implied trading ranges. Fundamental analysis plays a role, however markets often do not react to real-world factors in a logical fashion. Therefore, fundamental analysis is more appropriate for long-term investing.
The fundamental derivatives of a chart are time (x-axis) and price (y-axis). The primary technical indicator is price, as everything else is lagging in the past. Price represents current asking price and incorrectly implementing positions based on price is one of the biggest trading errors.
Markets and currencies ordinarily have noise, their tendency to back-and-fill, which must be filtered out for true pattern recognition. That noise does have a utility, however, in allowing traders second chances to enter favorable positions at slightly less favorable entry points. When you have any market with enough liquidity for historical data to record a pattern, then a structure can be divined. The market probes prices as part of an ongoing price-discovery process. Market technicians must sometimes look outside of the technical realm and use visual inspection to ascertain the relevance of certain patterns, using a qualitative eye that recognizes the underlying quantitative nature
Markets and instruments rise slower than they correct, however they rise much more than they fall. In the same vein, instruments can only fall to having no worth, whereas they could theoretically grow infinitely and have continued to grow over time. Money in a fiat system is illusory. It is a fundamentally synthetic instrument which has no intrinsic value. Hence, the recent seemingly illogical fluctuations in the market.
According to trade theory, the unending purpose of a market or instrument is to create and break price ranges according to the laws of supply and demand. We must determine when to trade based on each market inflection point as defined in price and in time as opposed to abandoning the trend (as the contrarian trading in this sub often does). Time and Price symmetry must be used to be in accordance with the trend. When coupled with a favorable risk to reward ratio, the ability to stay in the market for most of the defined time period, and adherence to risk management rules; the trader has a solid methodology for achieving considerable gains.
We will engage in a longer term market-oriented analysis to avoid any time-focused pressure. The Bitcoin market is open twenty-four-hours a day, so trading may be done when the individual is ready, without any pressing need to be constantly alert. Let alone, we can safely project months in advance with relatively high accuracy. Bitcoin is an asset which an individual can both trade and invest, however this article will be focused on trading due to the wide volatility in BTC prices over the short-term.
Technical Indicator Analysis of BitcoinTechnical indicators are often considered self-fulfilling prophecies due to mass-market psychology gravitating towards certain common numbers yielded from them. They are also often discounted when it comes to BTC. That means a trader must be especially aware of these numbers as they can prognosticate market movements. Often, they are meaningless in the larger picture of things.
Trend Definition Analysis of BitcoinTrend definition is highly powerful, cannot be understated. Knowledge of trend logic is enough to be a profitable trader, yet defining a trend is an arduous process. Multiple trends coexist across multiple time frames and across multiple market sectors. Like time structure, it makes the underlying price of the instrument irrelevant. Trend definitions cannot determine the validity of newly formed discretes. Trend becomes apparent when trades based in counter-trend inflection points continue to fail.
Downtrends are defined as an instrument making lower lows and lower highs that are recurrent, additive, qualified swing setups. Downtrends for all instruments are similar, except forex. They are fast and complete much quicker than uptrends. An average downtrend is 18 months, something which we will return to. An uptrend inception occurs when an instrument reaches a point where it fails to make a new low, then that low will be tested. After that, the instrument will either have a deep range retracement or it may take out the low slightly, resulting in a double-bottom. A swing must eventually form.
A simple way to roughly determine trend is to attempt to draw a line from three tops going upwards (uptrend) or a line from three bottoms going downwards (downtrend). It is not possible to correctly draw a downtrend line on the BTC chart, but it is possible to correctly draw an uptrend – indicating that the overall trend is downwards. The only mitigating factor is the impending stock market crash.
Time Symmetry Analysis of BitcoinTime is the movement from the past through the present into the future. It is a measurement in quantified intervals. In many ways, our perception of it is a human construct. It is more powerful than price as time may be utilized for a trade regardless of the market inflection point’s price. Were it possible to perfectly understand time, price would be totally irrelevant due to the predictive certainty time affords. Time structure is easier to learn than price, but much more difficult to apply with any accuracy. It is the hardest aspect of trading to learn, but also the most rewarding.
Humans do not have the ability to recognize every time window, however the ability to define market inflection points in terms of time is the single most powerful trading edge. Regardless, price should not be abandoned for time alone. Time structure analysis It is inherently flawed, as such the markets have a fail-safe, which is Price Structure. Even though Time is much more powerful, Price Structure should never be completely ignored. Time is the qualifier for Price and vice versa. Time can fail by tricking traders into counter-trend trading.
Time is a predestined trade quantifier, a filter to slow trades down, as it allows a trader to specifically focus on specific time windows and rest at others. It allows for quantitative measurements to reach deterministic values and is the primary qualifier for trends. Time structure should be utilized before price structure, and it is the primary trade criterion which requires support from price. We can see price structure on a chart, as areas of mathematical support or resistance, but we cannot see time structure.
Time may be used to tell us an exact point in the future where the market will inflect, after Price Theory has been fulfilled. In the present, price objectives based on price theory added to possible future times for market inflection points give us the exact time of market inflection points and price.
Time Structure is repetitions of time or inherent cycles of time, occurring in a methodical way to provide time windows which may be utilized for inflection points. They are not easily recognized and not easily defined by a price chart as measuring and observing time is very exact. Time structure is not a science, yet it does require precise measurements. Nothing is certain or definite. The critical question must be if a particular approach to time structure is currently lucrative or not.
We will measure it in intervals of 180 bars. Our goal is to determine time windows, when the market will react and when we should pay the most attention. By using time repetitions, the fact that market inflection points occurred at some point in the past and should, therefore, reoccur at some point in the future, we should obtain confidence as to when SPY will reach a market inflection point. Time repetitions are essentially the market’s memory. However, simply measuring the time between two points then trying to extrapolate into the future does not work. Measuring time is not the same as defining time repetitions. We will evaluate past sessions for market inflection points, whether discretes, qualified swings, or intra-range. Then records the times that the market has made highs or lows in a comparable time period to the future one seeks to trade in.
What follows is a time Histogram – A grouping of times which appear close together, then segregated based on that closeness. Time is aligned into combined histogram of repetitions and cycles, however cycles are irrelevant on a daily basis. If trading on an hourly basis, do not use hours.
Evaluating the yearly lows, we see that BTC tends to have its lows primarily at the beginning of every year, with a possibility of it being at the end of the year. Following the same methodology, we get the middle of the month as the likeliest day. However, evaluating the monthly lows for the past year, the beginning and end of the month are more likely for lows.
Therefore, we have two primary dates from our histogram.
1/1/21, 1/15/21, and 1/29/21
2:00am, 8:00am, 12:00pm, or 10:00pm
In fact, the high for this year was February the 14th, only thirty days off from our histogram calculations.
The 8.6-Year Armstrong-Princeton Global Economic Confidence model states that 2.15 year intervals occur between corrections, relevant highs and lows. 2.15 years from the all-time peak discrete is February 9, 2020 – a reasonably accurate depiction of the low for this year (which was on 3/12/20). (Taking only the Armstrong model into account, the next high should be Saturday, April 23, 2022). Therefore, the Armstrong model indicates that we have actually bottomed out for the year!
Bear markets cannot exist in perpetuity whereas bull markets can. Bear markets will eventually have price objectives of zero, whereas bull markets can increase to infinity. It can occur for individual market instruments, but not markets as a whole. Since bull markets are defined by low volatility, they also last longer. Once a bull market is indicated, the trader can remain in a long position until a new high is reached, then switch to shorts. The average bear market is eighteen months long, giving us a date of August 19th, 2021 for the end of this bear market – roughly speaking. They cannot be shorter than fifteen months for a central-bank controlled market, which does not apply to Bitcoin. (Otherwise, it would continue until Sunday, September 12, 2021.) However, we should expect Bitcoin to experience its’ exponential growth after the stock market re-enters a bull market.
Terry Laundy’s T-Theory implemented by measuring the time of an indicator from peak to trough, then using that to define a future time window. It is similar to an head-and-shoulders pattern in that it is the process of forming the right side from a synthetic technical indicator. If the indicator is making continued lows, then time is recalculated for defining the right side of the T. The date of the market inflection point may be a price or indicator inflection date, so it is not always exactly useful. It is better to make us aware of possible market inflection points, clustered with other data. It gives us an RSI low of May, 9th 2020.
The Bradley Cycle is coupled with volatility allows start dates for campaigns or put options as insurance in portfolios for stocks. However, it is also useful for predicting market moves instead of terminal dates for discretes. Using dates which correspond to discretes, we can see how those dates correspond with changes in VIX.
Therefore, our timeline looks like:
Hi guys,submitted by Raihan1998 to stockstotrade [link] [comments]
I'm a newbie intro forex trading. Currently, I'm studying the technical analysis of forex however I'm quite confused with regards to ATR calculation. As far as I know, ATR is the averages of the true range be it in the day chart or minute chart. However, I do know that TR = Highest minus lowest in the bar chart. But according to picture below, what do they mean by high minus close, current low minus prev close? Can anyone care to explain to me.. would gladly appreciate it.
submitted by FmzQuant to CryptoCurrencyTrading [link] [comments]
SummaryIn the previous article, we explained the premise of realizing the trading strategy from the aspects of the introduction of the M language , the basic grammar, the model execution method, and the model classification. In this article, we will continue the previous part, from the commonly used strategy modules and technologies. Indicators, step by step to help you achieve a viable intraday quantitative trading strategy.
Stage IncreaseStage increase is calculating the percentage of current K line's closing price compare with previous N periods of closing price's difference. For example: Computing the latest 10 K-lines stage increases, can be written:
CLOSE_0:=CLOSE; //get the current K-line's closing price, and save the results to variable CLOSE_0. CLOSE_10:=REF(CLOSE,10); //get the pervious 10 K-lines' closing price, and save the results to variable CLOSE_10 (CLOSE_0-CLOSE_10)/CLOSE_10*100;//calculating the percentage of current K line's closing price compare with previous N periods of closing price's difference.
New high priceThe new high price is calculated by whether the current K line is greater than N cycles' highest price. For example: calculating whether the current K line is greater than the latest 10 K-lines' highest price, can be written:
HHV_10:=HHV(HIGH,10); //Get the highest price of latest 10 K-lines, which includes the current K-line. HIGH>REF(HHV_10,1); //Judge whether the current K-line's highest price is greater than pervious K-lines' HHV_10 value.
Price raise with massive trading volume increaseFor example: If the current K line's closing price is 1.5 times of the closing price of the previous 10 K-lines, which means in 10 days, the price has risen 50%; and the trading volume also increased more than 5 times of the pervious 10 K-lines. can be written:
CLOSE_10:=REF(CLOSE,10); //get the 10th K-line closing price IS_CLOSE:=CLOSE/CLOSE_10>1.5; //Judging whether the current K Line closing price is 1.5 times greater than the value of CLOSE_10 VOL_MA_10:=MA(VOL,10); //get the latest 10 K-lines' average trading volume IS_VOL:=VOL>VOL_MA_10*5; //Judging whether the current K-line's trading volume is 5 times greater than the value of VOL_MA_10 IS_CLOSE AND IS_VOL; //Judging whether the condition of IS_CLOSE and IS_VOL are both true.
Price narrow-shock marketNarrow-shock market means that the price is maintained within a certain range in the recent period. For example: If the highest price in 10 cycles minus the lowest price in 10 cycles, the result divided by the current K-line's closing price is less than 0.05. can be written:
HHV_10:=HHV(CLOSE,10); //Get the highest price in 10 cycles(including current K-line) LLV_10:=LLV(CLOSE,10); //Get the lowest price in 10 cycles(including current K-line) (HHV_10-LLV_10)/CLOSE<0.05; //Judging whether the difference between HHV_10 and LLV_10 divided by current k-line's closing price is less than 0.05.
Moving average indicates bull marketMoving Average indicates long and short direction, K line supported by or resisted by 5，10，20，30，60 moving average line, Moving average indicates bull market or bear market. can be written:
MA_5:=MA(CLOSE,5); //get the moving average of 5 cycle closing price. MA_10:=MA(CLOSE,10);//get the moving average of 10 cycle closing price. MA_20:=MA(CLOSE,20);//get the moving average of 20 cycle closing price. MA_30:=MA(CLOSE,30);//get the moving average of 30 cycle closing price. MA_5>MA_10 AND MA_10>MA_20 AND MA_20>MA_30; //determine wether the MA_5 is greater than MA_10, and MA_10 is greater than MA_20, and MA_20 is greater than MA_30.
Previous high price and its locationsTo obtain the location of the previous high price and its location, you can use FMZ Quant API directly. can be written:
HHV_20:=HHV(HIGH,20); //get the highest price of 20 cycle(including current K line) HHVBARS_20:=HHVBARS(HIGH,20); //get the number of cycles from the highest price in 20 cycles to current K line HHV_60_40:REF(HHV_20,40); //get the highest price between 60 cycles and 40 cycles.
Price gap jumpingThe price gap is the case where the highest and lowest prices of the two K lines are not connected. It consists of two K lines, and the price gap is the reference price of the support and pressure points in the future price movement. When a price gap occurs, it can be assumed that an acceleration along the trend with original direction has begun. can be written:
HHV_1:=REF(H,1); //get the pervious K line's highest price LLV_1:=REF(L,1); //get the pervious K line's lowest price HH:=L>HHV_1; //judging wether the current K line's lowest price is greater than pervious K line's highest price (jump up) LL:=H
Common technical indicatorsMoving average
From a statistical point of view, the moving average is the arithmetic average of the daily price, which is a trending price trajectory. The moving average system is a common technical tool used by most analysts. From a technical point of view, it is a factor that affects the psychological price of technical analysts. The decision-making factor of thinking trading is a good reference tool for technical analysts. The FMZ Quant tool supports many different types of moving averages, as shown below:
MA_DEMO:MA(CLOSE,5); // get the moving average of 5 cycle MA_DEMO:EMA(CLOSE,15); // get the smooth moving average of 15 cycle MA_DEMO:EMA2(CLOSE,10);// get the linear weighted moving average of 10 cycle MA_DEMO:EMAWH(CLOSE,50); // get the exponentially weighted moving average of 50 cycle MA_DEMO:DMA(CLOSE,100); // get the dynamic moving average of 100 cycle MA_DEMO:SMA(CLOSE,10,3); // get the fixed weight of 3 moving average of closing price in 10 cycle MA_DEMO:ADMA(CLOSE,9,2,30); // get the fast-line 2 and slow-line 30 Kaufman moving average of closing price in 9 cycle.
Bollinger bands is also based on the statistical principle. The middle rail is calculated according to the N-day moving average, and the upper and lower rails are calculated according to the standard deviation. When the BOLL channel starts changing from wide to narrow, which means the price will gradually returns to the mean. When the BOLL channel is changing from narrow to wide, it means that the market will start to change. If the price is up cross the upper rail, it means that the buying power is enhanced. If the price down cross the lower rail, it indicates that the selling power is enhanced.
Among all the technical indicators, Bollinger Bands calculation method is one of the most complicated, which introduces the concept of standard deviation in statistics, involving the middle trajectory ( MB ), the upper trajectory ( UP ) and the lower trajectory ( DN ). luckily, you don't have to know the calculation details, you can use it directly on FMZ Quant platform as follows:
MID:MA(CLOSE,100); //calculating moving average of 100 cycle, call it Bollinger Bands middle trajectory TMP2:=STD(CLOSE,100); //calculating standard deviation of closing price of 100 cycle. TOP:MID+2*TMP2; //calculating middle trajectory plus 2 times of standard deviation, call it upper trajectory BOTTOM:MID-2*TMP2; //calculating middle trajectory plus 2 times of standard deviation, call it lower trajectory
The MACD indicator is a double smoothing operation using fast (short-term) and slow (long-term) moving averages and their aggregation and separation. The MACD developed according to the principle of moving averages removes the defect that the moving average frequently emits false signals, and also retains the effect of the other good aspect. Therefore, the MACD indicator has the trend and stability of the moving average. It was used to study the timing of buying and selling stocks and predicts stock price change. You can use it as follows:
DIFF:EMA(CLOSE,10)-EMA(CLOSE,50); //First calculating the difference between short-term moving average and long-term moving average. DEA:EMA(DIFF,10); //Then calculating average of the difference.The above is the commonly used strategy module in the development of quantitative trading strategies. In addition, there are far more than that. Through the above module examples, you can also implement several trading modules that you use most frequently in subjective trading. The methods are the same. Next, we began to write a viable intraday trading strategy.
Strategy WritingIn the Forex spot market, there is a wellknown strategy called HANS123. Its logic are basically judging wether the price breaks through the highest or lowest price of the number of K lines after the market opening
// Data Calculation Q:=BARSLAST(DATA<>REF(DATA,1))+1; //Calculating the number of period from the first K line of the current trading day to current k line, and assign the results to N HH:=VALUEWHEN(TIME=0930,HHV(H,Q)); //when time is 9:30, get the highest price of N cycles, and assign the results to HH LL:=VALUEWHEN(TIME=0930,LLV(L,Q)); //When time is 9:30, get the lowest price of N cycles, and assign the results to LL //Placing Orders TIME>0930 AND TIME<1445 AND C>HH,BK; //If the time is greater than 9:30 and lesser than 14:45, and the closing price is greater than HH, opening long position. TIME>0930 AND TIME<1445 AND C
To sum upAbove we have learned the concept of the strategy module. Through several commonly used strategy module cases, we had a general idea of the FMZ Quant programming tools, it can be said that learning to write strategy modules and improve programming logic thinking is a key step in advanced quantitative trading. Finally, we used the FMZ Quant tool to implement the trading strategy according a classical Forex trading strategy.
Next section noticeMaybe there are still some confusion for some people, mainly because of the coding part. Don't worry, we have already thought of that for you. On the FMZ Quant platform, there is another even easier programming tool for beginners. It is the visual programming, let's learn it soon!
submitted by MattPetroski to ItalicoIntegralism [link] [comments]
What Is Capitalism?Capitalism is an economic system in which private individuals or businesses own capital goods. The production of goods and services is based on supply and demand in the general market—known as a market economy—rather than through central planning—known as a planned economy or command economy.
The purest form of capitalism is free market or laissez-faire capitalism. Here, private individuals are unrestrained. They may determine where to invest, what to produce or sell, and at which prices to exchange goods and services. The laissez-faire marketplace operates without checks or controls.
Today, most countries practice a mixed capitalist system that includes some degree of government regulation of business and ownership of select industries.
Volume 75% 2:05
Understanding CapitalismFunctionally speaking, capitalism is one process by which the problems of economic production and resource distribution might be resolved. Instead of planning economic decisions through centralized political methods, as with socialism or feudalism, economic planning under capitalism occurs via decentralized and voluntary decisions.
Capitalism and Private PropertyPrivate property rights are fundamental to capitalism. Most modern concepts of private property stem from John Locke's theory of homesteading, in which human beings claim ownership through mixing their labor with unclaimed resources. Once owned, the only legitimate means of transferring property are through voluntary exchange, gifts, inheritance, or re-homesteading of abandoned property.
Private property promotes efficiency by giving the owner of resources an incentive to maximize the value of their property. So, the more valuable the resource is, the more trading power it provides the owner. In a capitalist system, the person who owns the property is entitled to any value associated with that property.
For individuals or businesses to deploy their capital goods confidently, a system must exist that protects their legal right to own or transfer private property. A capitalist society will rely on the use of contracts, fair dealing, and tort law to facilitate and enforce these private property rights.
When a property is not privately owned but shared by the public, a problem known as the tragedy of the commons can emerge. With a common pool resource, which all people can use, and none can limit access to, all individuals have an incentive to extract as much use value as they can and no incentive to conserve or reinvest in the resource. Privatizing the resource is one possible solution to this problem, along with various voluntary or involuntary collective action approaches.
Capitalism, Profits, and LossesProfits are closely associated with the concept of private property. By definition, an individual only enters into a voluntary exchange of private property when they believe the exchange benefits them in some psychic or material way. In such trades, each party gains extra subjective value, or profit, from the transaction.
Voluntary trade is the mechanism that drives activity in a capitalist system. The owners of resources compete with one another over consumers, who in turn, compete with other consumers over goods and services. All of this activity is built into the price system, which balances supply and demand to coordinate the distribution of resources.
A capitalist earns the highest profit by using capital goods most efficiently while producing the highest-value good or service. In this system, information about what is highest-valued is transmitted through those prices at which another individual voluntarily purchases the capitalist's good or service. Profits are an indication that less valuable inputs have been transformed into more valuable outputs. By contrast, the capitalist suffers losses when capital resources are not used efficiently and instead create less valuable outputs.
Free Enterprise or Capitalism?Capitalism and free enterprise are often seen as synonymous. In truth, they are closely related yet distinct terms with overlapping features. It is possible to have a capitalist economy without complete free enterprise, and possible to have a free market without capitalism.
Any economy is capitalist as long as private individuals control the factors of production. However, a capitalist system can still be regulated by government laws, and the profits of capitalist endeavors can still be taxed heavily.
"Free enterprise" can roughly be understood to mean economic exchanges free of coercive government influence. Although unlikely, it is possible to conceive of a system where individuals choose to hold all property rights in common. Private property rights still exist in a free enterprise system, although the private property may be voluntarily treated as communal without a government mandate.
Many Native American tribes existed with elements of these arrangements, and within a broader capitalist economic family, clubs, co-ops, and joint-stock business firms like partnerships or corporations are all examples of common property institutions.
If accumulation, ownership, and profiting from capital is the central principle of capitalism, then freedom from state coercion is the central principle of free enterprise.
Feudalism the Root of CapitalismCapitalism grew out of European feudalism. Up until the 12th century, less than 5% of the population of Europe lived in towns. Skilled workers lived in the city but received their keep from feudal lords rather than a real wage, and most workers were serfs for landed nobles. However, by the late Middle Ages rising urbanism, with cities as centers of industry and trade, become more and more economically important.
The advent of true wages offered by the trades encouraged more people to move into towns where they could get money rather than subsistence in exchange for labor. Families’ extra sons and daughters who needed to be put to work, could find new sources of income in the trade towns. Child labor was as much a part of the town's economic development as serfdom was part of the rural life.
Mercantilism Replaces FeudalismMercantilism gradually replaced the feudal economic system in Western Europe and became the primary economic system of commerce during the 16th to 18th centuries. Mercantilism started as trade between towns, but it was not necessarily competitive trade. Initially, each town had vastly different products and services that were slowly homogenized by demand over time.
After the homogenization of goods, trade was carried out in broader and broader circles: town to town, county to county, province to province, and, finally, nation to nation. When too many nations were offering similar goods for trade, the trade took on a competitive edge that was sharpened by strong feelings of nationalism in a continent that was constantly embroiled in wars.
Colonialism flourished alongside mercantilism, but the nations seeding the world with settlements were not trying to increase trade. Most colonies were set up with an economic system that smacked of feudalism, with their raw goods going back to the motherland and, in the case of the British colonies in North America, being forced to repurchase the finished product with a pseudo-currency that prevented them from trading with other nations.
It was Adam Smith who noticed that mercantilism was not a force of development and change, but a regressive system that was creating trade imbalances between nations and keeping them from advancing. His ideas for a free market opened the world to capitalism.
Growth of Industrial CapitalismSmith's ideas were well-timed, as the Industrial Revolution was starting to cause tremors that would soon shake the Western world. The (often literal) gold mine of colonialism had brought new wealth and new demand for the products of domestic industries, which drove the expansion and mechanization of production. As technology leaped ahead and factories no longer had to be built near waterways or windmills to function, industrialists began building in the cities where there were now thousands of people to supply ready labor.
Industrial tycoons were the first people to amass their wealth in their lifetimes, often outstripping both the landed nobles and many of the money lending/banking families. For the first time in history, common people could have hopes of becoming wealthy. The new money crowd built more factories that required more labor, while also producing more goods for people to purchase.
During this period, the term "capitalism"—originating from the Latin word "capitalis," which means "head of cattle"—was first used by French socialist Louis Blanc in 1850, to signify a system of exclusive ownership of industrial means of production by private individuals rather than shared ownership.
Contrary to popular belief, Karl Marx did not coin the word "capitalism," although he certainly contributed to the rise of its use.
Industrial Capitalism's EffectsIndustrial capitalism tended to benefit more levels of society rather than just the aristocratic class. Wages increased, helped greatly by the formation of unions. The standard of living also increased with the glut of affordable products being mass-produced. This growth led to the formation of a middle class and began to lift more and more people from the lower classes to swell its ranks.
The economic freedoms of capitalism matured alongside democratic political freedoms, liberal individualism, and the theory of natural rights. This unified maturity is not to say, however, that all capitalist systems are politically free or encourage individual liberty. Economist Milton Friedman, an advocate of capitalism and individual liberty, wrote in Capitalism and Freedom (1962) that "capitalism is a necessary condition for political freedom. It is not a sufficient condition."
A dramatic expansion of the financial sector accompanied the rise of industrial capitalism. Banks had previously served as warehouses for valuables, clearinghouses for long-distance trade, or lenders to nobles and governments. Now they came to serve the needs of everyday commerce and the intermediation of credit for large, long-term investment projects. By the 20th century, as stock exchanges became increasingly public and investment vehicles opened up to more individuals, some economists identified a variation on the system: financial capitalism.
Capitalism and Economic GrowthBy creating incentives for entrepreneurs to reallocate away resources from unprofitable channels and into areas where consumers value them more highly, capitalism has proven a highly effective vehicle for economic growth.
Before the rise of capitalism in the 18th and 19th centuries, rapid economic growth occurred primarily through conquest and extraction of resources from conquered peoples. In general, this was a localized, zero-sum process. Research suggests average global per-capita income was unchanged between the rise of agricultural societies through approximately 1750 when the roots of the first Industrial Revolution took hold.
In subsequent centuries, capitalist production processes have greatly enhanced productive capacity. More and better goods became cheaply accessible to wide populations, raising standards of living in previously unthinkable ways. As a result, most political theorists and nearly all economists argue that capitalism is the most efficient and productive system of exchange.
Capitalism vs. SocialismIn terms of political economy, capitalism is often pitted against socialism. The fundamental difference between capitalism and socialism is the ownership and control of the means of production. In a capitalist economy, property and businesses are owned and controlled by individuals. In a socialist economy, the state owns and manages the vital means of production. However, other differences also exist in the form of equity, efficiency, and employment.
EquityThe capitalist economy is unconcerned about equitable arrangements. The argument is that inequality is the driving force that encourages innovation, which then pushes economic development. The primary concern of the socialist model is the redistribution of wealth and resources from the rich to the poor, out of fairness, and to ensure equality in opportunity and equality of outcome. Equality is valued above high achievement, and the collective good is viewed above the opportunity for individuals to advance.
EfficiencyThe capitalist argument is that the profit incentive drives corporations to develop innovative new products that are desired by the consumer and have demand in the marketplace. It is argued that the state ownership of the means of production leads to inefficiency because, without the motivation to earn more money, management, workers, and developers are less likely to put forth the extra effort to push new ideas or products.
EmploymentIn a capitalist economy, the state does not directly employ the workforce. This lack of government-run employment can lead to unemployment during economic recessions and depressions. In a socialist economy, the state is the primary employer. During times of economic hardship, the socialist state can order hiring, so there is full employment. Also, there tends to be a stronger "safety net" in socialist systems for workers who are injured or permanently disabled. Those who can no longer work have fewer options available to help them in capitalist societies.
Mixed System vs. Pure CapitalismWhen the government owns some but not all of the means of production, but government interests may legally circumvent, replace, limit, or otherwise regulate private economic interests, that is said to be a mixed economy or mixed economic system. A mixed economy respects property rights, but places limits on them.
Property owners are restricted with regards to how they exchange with one another. These restrictions come in many forms, such as minimum wage laws, tariffs, quotas, windfall taxes, license restrictions, prohibited products or contracts, direct public expropriation, anti-trust legislation, legal tender laws, subsidies, and eminent domain. Governments in mixed economies also fully or partly own and operate certain industries, especially those considered public goods, often enforcing legally binding monopolies in those industries to prohibit competition by private entities.
In contrast, pure capitalism, also known as laissez-faire capitalism or anarcho-capitalism, (such as professed by Murray N. Rothbard) all industries are left up to private ownership and operation, including public goods, and no central government authority provides regulation or supervision of economic activity in general.
The standard spectrum of economic systems places laissez-faire capitalism at one extreme and a complete planned economy—such as communism—at the other. Everything in the middle could be said to be a mixed economy. The mixed economy has elements of both central planning and unplanned private business.
By this definition, nearly every country in the world has a mixed economy, but contemporary mixed economies range in their levels of government intervention. The U.S. and the U.K. have a relatively pure type of capitalism with a minimum of federal regulation in financial and labor markets—sometimes known as Anglo-Saxon capitalism—while Canada and the Nordic countries have created a balance between socialism and capitalism.
Many European nations practice welfare capitalism, a system that is concerned with the social welfare of the worker, and includes such policies as state pensions, universal healthcare, collective bargaining, and industrial safety codes.
Crony CapitalismCrony capitalism refers to a capitalist society that is based on the close relationships between business people and the state. Instead of success being determined by a free market and the rule of law, the success of a business is dependent on the favoritism that is shown to it by the government in the form of tax breaks, government grants, and other incentives.
In practice, this is the dominant form of capitalism worldwide due to the powerful incentives both faced by governments to extract resources by taxing, regulating, and fostering rent-seeking activity, and those faced by capitalist businesses to increase profits by obtaining subsidies, limiting competition, and erecting barriers to entry. In effect, these forces represent a kind of supply and demand for government intervention in the economy, which arises from the economic system itself.
Crony capitalism is widely blamed for a range of social and economic woes. Both socialists and capitalists blame each other for the rise of crony capitalism. Socialists believe that crony capitalism is the inevitable result of pure capitalism. On the other hand, capitalists believe that crony capitalism arises from the need of socialist governments to control the economy.
Start with $30 trading bonusTrade forex and CFDs on stock indices, commodities, stocks, metals and energies with a licensed and regulated broker. For all clients who open their first real account, XM offers a $30 trading bonus to test the XM products and services without any initial deposit needed. Learn more about how you can trade over 1000 instruments on the XM MT4 and MT5 platforms from your PC and Mac, or from a variety of mobile devices.Compare Investment Accounts
The Average True Range (ATR) indicator was developed and proposed as a technical indicator by Welles Wilder. It does not determine the direction of the trend in the market but acts solely as a measure of its volatility. The idea of average true range (ATR) was devised by Wells Wilder in his ground-breaking book, New Concepts in Technical Trading Systems, in 1978. ATR is not used much as an indicator, but is useful as a reality-check in setting stops and targets. Range refers to the high-low range of a bar of any timeframe — hourly, H4, daily, whatever. The Average True Range is most commonly calculated on a 14-period basis, but as with most other indicators, it can be fine-tuned according to each traders unique trading system. Best Forex Brokers for United States What is the Average True Range. The average true range was created by J. Welles Wilder to measure volatility. As price makes larger or smaller moves higher or lower the ATR becomes bigger or smaller indicating the asset volatility. The ATR is shown in pip amounts for Forex or dollar amounts for other markets. Where ATR n — average true range for the period n — the first period, for which all the n true range values are present,. TR i — true range for the period i.. Examples 7 periods. The first example shows a complete calculation process for the 7-day average true range on the EUR/USD currency pair. 8 price quotes is enough to calculate 2 ATR values.
[index]          
The average true range trading indicator measures the volatility in the instrument you are trading. Using the ATR can help you in many ways including as a fu... I love the Average True Range (ATR) indicator. Because unlike other trading indicators that measure momentum, trend direction, overbought levels, and etc. Th... http://www.capexforextrading.com/forex-technical-indicators The average true range is solely used to measure volatility. It is because of this that it can be... Average True Range (ATR) Indicator Explained Simply and Understandably. // stocks trading strategies strategy forex stop loss how to use options for calculat... Very few Forex traders know the true value of the Average True Range indicator freely available on most platforms. This videos show you how to get the maximu...